Shake or stir the container before use. Prior to application clean the surface with water or a solvent using a cloth. The application surface should be dry and clean. Apply SurfaShield G by HVLP (tip diameter 0,8mm) spraying. Two or three applications of a very thin layer are recommended. Between each application let the material dry (up to 10 minutes strongly dependent on ambient temperature). Do not apply excessive amounts of the material on the glass surface (do not allow dripping). Total consumption rate of 30-38  is recommended. After the application let the material to cure on the surface without wetting or touching it. Only water is necessary for the cleaning of the coated surface.
|